JWJ-10A Metal Wire Bending Tester

I、Overview of metal wire bending testing machine

1. The metal wire bending testing machine is mainly used for the repeated bending test of metal wire to test the performance of metal wire under plastic deformation and defects in repeated bending. Apply to Ф 1— Ф 10 metal wire, equipped with special fixture, can also do metal bending test of other specifications. The machine is widely used in steel, construction industry, prestressed steel wire, steel wire rope, wire and cable manufacturers.

2. Test principle: clamp the sample with a certain diameter through the guide sleeve in the jaws of two specified sizes, press the button, and the sample will bend left and right 90 °. After the sample is broken, it will stop automatically and record the bending times.

II、Technical parameters of metal bending testing machine

1. Sample diameter: Φ 1- Φ 10mm

2. Sample length: 260-350mm

3. Bending angle: ± 90 ° (plane bending)

4. Counting range: 999999

5. Display mode: liquid crystal display, automatic recording times

6. Bending speed: ≤ 60rpm

7. Motor power: 1.5kw

8. Power supply: single, 220V, 50Hz

9. Overall dimension: 600 * 500 * 1200mm

10. Host weight: about 230kg

  For more detailed parameters and technical data, please consult the technical or Sales Department of the company.